Overview
STACK currently offers two assemblies under Division 04. The brick assembly contains a large selection of brick types, and the block wall contains several choices for CMU block size.
04 Masonry
Brick – Area & Surface Area
Summary: This assembly is designed for either an Area or a Surface Area takeoff.
Variables:
There are no variables in this assembly.
Required Items:
These items will be automatically added to your takeoff.
- Weep Holes – yields number of pieces based on total area.
- Mortar – calculates the number of 80 lb. Bags.
- Brick Labor – by the square foot.
Item Groups:
This group contains a selection of items to choose if needed.
- · Choose Brick – a wide assortment of brick types by the thousand.
CMU Wall - Linear
Summary: This assembly is designed for a linear takeoff.
Variables:
- Wall Height In Feet - all items in this assembly use this variable.
- Control Joint Spacing In Feet – only required if choosing the control joint item.
- Vertical Rebar Spacing In Inches - used to calculate both rebar and grout.
- Rebar Count Per Cell – used to calculate rebar.
Required Items:
- CMU Labor – by the block.
- Rebar – yields linear feet and calculated using takeoff length, rebar spacing, wall height and rebar count variables.
- Masonry Grout – in cubic feet.
Item Groups:
These groups contain a selection of items to choose if needed.
- Choose Block – an assortment of CMU block sizes all 8”x16”.
- Control Joint – in linear feet, relies on the control join spacing variable.
- Mesh Reinforcing – horizontal reinforcing in total linear feet.
More on Quick Start Assemblies
02 Asphalt Quick Start Assemblies
06 Wood, Plastics & Composites
07 Roofing Quick Start Assemblies
09 Finishes Quick Start Assemblies
32 Landscaping Quick Start Assemblies
See how others use this feature in the STACK Community.
If you need additional assistance, please Contact Us.
Comments
Please sign in to leave a comment.