Avatar

Dave Elfers

  • Actividad total 92
  • Última actividad
  • Miembro desde
  • Siguiendo 0 usuarios
  • Lo siguen 0 usuarios
  • Votos 0
  • Suscripciones 32

Resumen de la actividad

Última actividad de Dave Elfers
  • Dave Elfers hizo un comentario,
    Comentario oficial
    1. Comunidad
    2. Ask The Community
    3. Adding Thing Automatically

    Hi Craig.  When using Explode you get a linear takeoff with one line for each board you will be installing.  The secondary measurement for a linear takeoff is the count.  Each line (measurement) is...

  • Dave Elfers hizo un comentario,
    1. Comunidad
    2. Learn & Share
    3. Hack for Adding Count to Lineal

    Perhaps the count you are hoping for is already there.  All assembly formulas are calculated at the measurement level.  If you don't provide a takeoff variable, we automatically use MeasuredCount. ...

  • Dave Elfers creó una publicación,

    Working with Multiple Scales

    1. Comunidad
    2. Learn & Share

    Posted by: Laurent Dumont This is helpful if you have a plan sheet that has different drawings with different scales. It allows you to measure the different drawings on the sheet using the appropri...

    • 1 seguidor
    • 0 comentarios
    • 0 votos
  • Dave Elfers hizo un comentario,
    1. Comunidad
    2. Ask The Community
    3. Window and Door Trim

    Reply by: BoundsEYou may need multiple takeoffs depending on sizes, and how you plan to measure, but you shouldn’t have to make a bunch of size specific assemblies. You can just add the trim item t...

  • Dave Elfers hizo un comentario,
    1. Comunidad
    2. Ask The Community
    3. Window and Door Trim

    Reply by: Jason ArmstrongI use these for my interior trim.  We are always milling our own trim hence the BF option.  For regular trim, ie MDF, ask your supplier for a price quote for one stick of e...

  • Dave Elfers hizo un comentario,
    1. Comunidad
    2. Ask The Community
    3. Window and Door Trim

    Reply by: Jason ArmstrongThis is how I do my interior trim.  If you are using both 5/4 and 4/4 stock this could be expanded to suit this.  Obviously this only does pricing and not a material order....

  • Dave Elfers creó una publicación,

    Window and Door Trim

    1. Comunidad
    2. Ask The Community

    Posted by: craig.parker How are folks dealing with this? The house I’m working on will be easy - everything is just picture-framed (mitred), but I wonder if there’s a way to quickly say “3x5 window...

    • 1 seguidor
    • 3 comentarios
    • 0 votos
  • Dave Elfers creó una publicación,

    Utilizing the Perimeter of Area Takeoff Measurements

    1. Comunidad
    2. Learn & Share

    Posted by:  Devon Streckfuss You can add Items or Assemblies with “Lin Ft” as their Unit of Measure to Area Takeoffs. This will cause those Items to calculate cost, and quantity based on the distan...

    • 1 seguidor
    • 0 comentarios
    • 0 votos
  • Dave Elfers creó una publicación,

    Using our AI tools (Draw Mode/ AI Assist)

    1. Comunidad
    2. Learn & Share

    Posted by:  Devon Streckfuss STACK offers two AI-powered tools to help you complete your Takeoff measurements faster. Those tools and their function are described below:  Draw Mode - After it proc...

    • 1 seguidor
    • 0 comentarios
    • 0 votos
  • Dave Elfers hizo un comentario,
    1. Comunidad
    2. Ask The Community
    3. Use one takeoff for multiple VE options

    Reply by: Level ProIf you add all three assemblies to your roof measurement, then when you go to make your estimates you can make three different estimates and you can select which assemblies you w...